======================
1.How to update s/w by PC?
======================
1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
2) Connect your PC and receiver with twisted RS-232C cable.
3) Power off your receiver.
4) Run EasyUpgrade.exe on your PC,click <Start>,then Power on the receiver,the upgrade will start.
5) When finish, the LED will display "-End" ,then restart the receiver.

============================
2.How to update receiver to receiver?
============================
1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
2) Connect the master receiver and the slave receiver with twisted RS-232C cable.
3) Turn on the master receiver and press "POWER" key to make it standby, the LED dot will blink.
4) Turn on the slave receiver,then the LED of master receiver will display 'H'.
5) Input digit number on master receiver to update different parts:
	 111---- Update software.
	 222---- Update data.
	 333---- Update data,then software.
	 444---- All flash except boot loader. 	
6) When finish, the LED  will display "-End"
======================
3.How to Enable/Disable Patch?
======================
  Main Menu->Mute+999 

======================
4.How to Edit Patch key?
======================
  if patch is enable:
  1) Key menu:Main Menu-->STB Setting-->Manual Key
  2) Current Key: INFO+0
  3) All ECM List: INFO+1
  4) RS232 Mode List: INFO+9

======================
5.CA Menu
======================
 Mainmenu->CA Menu

==============================
6.Loading G-Boy Game's Via USB
==============================
  Download G-Boy Games from internet (G-Boy, extension (.gb, .gbc)
  Play Game's Available Keys:
  1) UP/DOWN/LEFT/RIGHT
  2) 0/1/2
  3) OK/EXIT
  4) AUDIO

==============================
7. Change Start-up/Radio Logo
==============================
   Note: It will replace the default logo.
   6.1 -- Capture Pause Picture as Start-up/Radio Logo
          1) Press "PAUSE" to pause the picture
          2) Press "PAUSE" again, it will pop-up a menu to ask if save as the picture
             a) Start-up Logo
             b) Radio Logo
             c) Cancel
          Select a or b and wait some seconds for the converting.

   6.2 -- Convert BMP/JPEG via USB as Start-up/Radio Logo
         1) Play BMP/JPEG via USB
         2) Press RED key to save it as Start-up Logo or Radio Logo
