======================
1.How to update s/w by PC?
======================
1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
2) Connect your PC and receiver with twisted RS-232C cable.
3) Turn on the receiver and press "POWER" key to make it standby, the LED dot will blink.
4) Run the update tool on your PC,Slect the <Download Main S/W>,press <Open> and select the bin   file,then click <Start>,upgrade will begin.
5) After finishing, the LED will display "-End"

======================
2.How to Enable Patch or Disable Patch?
======================
 Exit all menu, Press F1 key, the LED will display 'H', then press '000'

======================
3.How to Edit Patch key?
======================
 After Enable patch key, go to Main Menu-->Installation-->Patch Menu

======================
4.How to update the Patch key?
======================
1) Download the softcam.key from the internet.  
2) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
2) Connect your PC and receiver with twisted RS-232C cable.
3) Turn on the receiver and press "POWER" key to make it standby, the LED dot will blink.
4) Run the update tool on your PC,Slect the <Download Key>,press <Open> and select the softcam.key  file,then click <Start>,upgrade will gin.
5) After finishing, the LED will display "-End"



pozzz m
